Aircraft
30% Sbach 342
  • RC Xtreme Machines is Proud to present its first offering.
  • Beauty of Sbach 342
  • Original plane is designed by Mr. Phillip Steinbach. This is our tribute to this outstanding designer and pilot.
    • Specifications of the 30% Sbach 342
    Dimensions:
  • Wing Span: 89 inches
  • Wing Area: 1585 Sq inches
  • Fuselage Length (including spinner): 80 inches
  • Stab Span: 38 inches
  • Flying Weight: 16 – 16.5 lbs
  • Wing Loading: 23.27 oz/sq inch
  • Engine Recommendations: 50 cc – 60 cc Gasoline Engine
    • Features
    Design Features:
  • If you look at the planes you will notice the plane has scale lines. This is possible only because each and every sexy curve of the original has been incorporated into our model.
  • The plane is not made with plywood sides, as we have all grown used to. Apart from low cost of production, it is simply a heaver and downright ugly way to make a plane.
  • Our Sbach is not a boxy, but has a beautiful sexy curve in the fuse.
    • A great deal of effort has gone into the designing to make the plane lighter and stronger, the stiffer the plane the more precise it will be. The balsa side add stiffness that you wouldn’t believe.
    Carbon Fiber Integration in the Fuselage
    Following this goal of lightness and stiffness we have added carbon fiber into the airframe
    The Cowl
    The cowl is another part were a lot of effort was put in so that it reflects the beauty of the original plane. Not only that the cowl has been engineered to be light weight as well. We have used carbon fiber in the cowl to make it stronger and lighter.
    Carbon Parts
  • The CF spinner is specially designed and manufactured for the SBACH 342
  • Wing Tube and Tail Tube are Carbon Fiber. The wing tube is engineered with aerospace grade carbon fiber making it incredibly hard yet light.
  • Landing Gear and Tail wheel bracket
  • Custom built CF Control Horns, Servo Arms and Push Rods
  • Carbon/ply firewall
  • The Latch Mechanism on the canopy is Carbon Fiber as well
  • Carbon Reinforcment
  • CF L-bracket on firewall
  • CF L-bracket between fuel tank base and firebox
  • CF Reinforcement on landing gear plate
  • CF – L brackets attach the CF Ribs
    • Carbon Parts
    We have decided to give you guys the best and the most reliable. We are confident you will not get better hardware then this in an ARF at this price
  • Durbo Ball Links
  • Dubro 4-40 Pull-Pull System
  • Dubro Super Lite Wheels including tail wheel
  • Tygon Tubing
  • Dubro Fuel Tank
  • Dubro Fuel Line Clips
  • Dubro The Final Filter
  • Robart Hinges
  • Dubro Nuts and bolts
    • Pre Installation
    We want you to fly. Our goal is to get you to your field the quickest and with maximum reliability.
  • All surfaces are pre-hinged and glued
  • Control horns are glued in place
  • Push rod, ball links in place
  • Pull pull cable attached
  • Fuel tank installed
  • Refueler installed
  • Filter installed
    • Packaging
  • We believe that our plane is only going to perform, if its intact. Getting the plane from our factory to your workshop is our responsibility
  • The box is made out of plywood with reinforcements. Everything is designed to withstand our friends at the courier service
    • Warranties
  • All parts damaged in shipping will be replaced
  • Any part that is defective will be replaced
    		•